Duramaxtuner's Stealth DT44 Turbocharger Install
Attached below you will find detailed instructions on how to install your Turbocharger.
Before you start there is a few important steps.
1. The New turbocharger does not include a Actuator. You must remove your actuator from your factory turbocharger and re-use it.
2. The New turbocharger comes with a new Actuator ROD. It is very important you use this rod with the turbocharger. DO NOT USE THE OEM ROD. Please follow link 3 for specifics on how the rod attaches.
3. It is now time to remove the actuator from the Stock turbocharger. Follow the link here-Actuator Rod
If you need help with the rod itself.***you must use the NEW ROD*****
**** There is no physical turbocharger relearn needed with a scan tool******