2020+ Ford 6.7L Tcm flashing

This article should help you get your 2020+ Ford tcm flashed if you are getting stock at 0%.

If the trans tune wont load on your ez lynk then you will need to follow these steps below to get the tune installed.

1. Turn the ignition off, unplug the ez lynk, close out of the ez lynk and open the drivers door.

2. Plug the ez lynk back in, turn the ignition on, open the ez lynk app and connect to the ez lynk under your phones wifi.

3. With the ignition on choose the tune file you want to load and when it asks you to turn the key off and back on be sure to leave it on for both of these first 2 steps.

4. Once the ez lynk flash passes 0% then you can follow the rest of the prompts on the screen.