EFI Live Quick Setup Instructions

1. Make sure your device is up to date by following the instructions here.
2. Save the quick setup file that we emailed over to you.
3. Connect your spade to your computer and open "EFI Live V8 Scan and Tune"
   
   (Ensure there is a green check mark on one of the boxes in the lower right-hand corner of the window (the black device will be checked for Spades/Autocals, the white device will be checked for flashscans). If you do not see the checkmark, you can click the box to retry the connection)
4. Select "F5 BBX" on the left-hand side of the window
5. Select "F6 Quick Setup" on the left-hand side of the window
6. Select "Open Quick Setup" at the bottom and in the file explorer window that pops up, navigate to wherever you saved the quick setup file. Select that file and choose "Open"
   
   
7. Once the file has been opened you can hit the red "Program Quick Setup” button at the bottom and wait for the progress bar to finish.
8. Once this is complete the tool has been loaded with your tune files and your configuration files.

If you have any further questions or didn't find an answer to the question you had in this article, click here and fill out the form and one of our Remote Support experts will be in contact with you.