EFI Live Serial Switching On Edge CTS3

This article will cover how to turn on serial switching on a CTS3 for those that DO NOT have a hardwired switch.

1. Flash in a DSP file that is set up for serial switching.

2. Mount your Edge CTS3 in the location of your choosing.

3. Press and slide finger down from the top of the screen to open the menu, select Edit Layout.

4. With the Layout Editor open select Screen 1.

5.Once Screen 1 is selected you will have the option to toggle through multiple layout options.

6. Scroll down until you find the layout that has the option for power levels on the left side.

7. Save the layout and load it in.

8.This is what your screen should look like when you are finished.